Home
  10 Most Recent FAQs
  Terminology
  General Information
  Availability
  Fios Installation
  Hardware
  IP and Port Information
  Software
  FiosTV FAQ
  Speed Information
  Verizon Information
  Documents and Manuals
  Firmware


 

Is it possible to take the Channel 3 output from a STB and feed that back into the coax distribution system so that TVs without a STB could get converted digital channels?

Category:FiosTV FAQ

This is possible (actually with any cable system/ setup), but you will need a cable modulator (www.partsexpress.com). Also, you will need to change the channel for the entire house, and the main STB.

This could be helpful if you "need" to have  single channel on analog, you can get a STB and have it feed the cable modulator which would then distribute the analog signal to every tv int he house that has an analog (NTSC) tuner.



Written by Mike O'Rourke
Last updated on 04.06.07

 
Copyright RHInc 2006  
Help | Contact
 
This page is NOT affiliated with Verizon Communications. All Trademarks and Copyrights are property of their respective owners. Use this information at your own risk. RH