Home
  10 Most Recent FAQs
  Terminology
  General Information
  Availability
  Fios Installation
  Hardware
  IP and Port Information
  Software
  FiosTV FAQ
  Speed Information
  Verizon Information
  Documents and Manuals
  Firmware


 

The wiring diagram is unclear. Are the power/signal wires sent to the BBU then sent to router/STB, or do the internet and tv signals come directly from the ONT?

Category:Fios Installation

In short, the ONT provides the internet and tv signals.

The power/signal wires that run between the BBU and ONT are to supply the ONT with its power needs (approx. 12 VDC) as there is no voltage on the fiber, and provide information to the ONT regarding the state of the BBU and PSU.

 



Written by Shawn - John L
Last updated on 11.02.07

 
Copyright RHInc 2006  
Help | Contact
 
This page is NOT affiliated with Verizon Communications. All Trademarks and Copyrights are property of their respective owners. Use this information at your own risk. RH